Faber 7L Steel 232 Bar Twin Tanks With Manifold & Bands

The Faber 7L twin tanks are very popular with tech divers who don’t want to carry large heavy twin tanks on their backs, but do want the added safety of manifolded twin tanks!

The twin tank system comes standard with a left hand side and right hand side 232 bar manifold valve and isolation bar as well as two bands with bolts and rubber tank boots for the cylinders (which can be removed if necessary).

The valves are made by Sanosub (the most common valve for Faber cylinders) and come with a DIN insert, so can be used as Yoke (with insert) and DIN (without insert). You can also order them with high pressure valves. These valve have a slightly deeper thread.

We always recommend to get some additional blanking plugs as well. This will give you the option to split the tanks up at a later stage by removing the isolation bar and bands and screw in the plugs instead. That way your 7L tanks can be used as singles. They will have a LHS and RHS valve and as they’re small tanks, this is a very streamlined option for sidemount!

When shipped, the tanks will have the valves installed, but the isolation bar and bands are not installed. 

We offer free Australia-wide shipping on all cylinders and twin tank systems.

Unfortunately we cannot ship these internationally.

Please note these are 232 bar cylinders that can be ordered with a 232 bar or 300 bar manifold. For high pressure (300 bar) cylinders, please look for “HP 300 bar cylinder”.